Prijava
Korisničko ime:

Lozinka:

remember me

Zaboravili lozinku?

Registrirajte se!
Glavni menu
Potraga
Tko je online
8 korisnika je online (7 korisnika cita Diskusije)

članovi: 0
Gosti: 8

više...
HULK-Diskusije - Hardware - Tuner Videomate T750 i Slackware 12.0
Chat WIKI Kontakt
HULK Forum Index
   Hardware
  Tuner Videomate T750 i Slackware 12.0

Pregledavanje ovog Threada:   1 Anonimnih Korisnika

 

 Dno   Prethodna tema   Sljedeca tema
  •  Ocjena Threada
      Ocijenite ovaj Thread
      Izvrsno
      Dobro
      Prosjecno
      Loše
      Užasno
Pošiljatelj Thread
  •  semiRocket
      semiRocket
Tuner Videomate T750 i Slackware 12.0
#1
Padawan
Pridružen: 02.02.2009
Od Rijeka, blizu slovenske granice
Poruke: 79
Level : 7
HP : 0 / 170
MP : 26 / 7858
EXP : 83
Grupa:
Registered Users
Offline
Poštovani linux korisnici,

Imam relativno novu Dual Analog+DVB-T karticu Compro Videomate Vista T750F i do sada sam uspješno instalirao samo program za gledanje TVTime verzije 1.0.2. Kada ga otvorim prisutna je samo crna slika.
_______
lspci -vnn:
00:0a.0 Multimedia controller [0480]: Philips Semiconductors SAA7133/SAA7135 Video Broadcast Decoder [1131:7133] (rev d1)
Subsystem: Compro Technology, Inc. VideoMate T750 [185b:c900]
Flags: bus master, medium devsel, latency 32, IRQ 20
Memory at dfffb800 (32-bit, non-prefetchable) [size=2K]
Capabilities: [40] Power Management version 2
_____
dmesg (prikazane su samo relativne stvari):

# Ovo su neke greške, možda nešto vezano za i2c_core

... (izbačen dio)

ACPI: PCI Interrupt 0000:00:0b.0[A] -> GSI 19 (level, low) -> IRQ 18
Linux video capture interface: v2.00
i2c_core: exports duplicate symbol i2c_smbus_write_i2c_block_data (owned by kernel)
saa7130/34: v4l2 driver version 0.2.14 loaded
kobject_add failed for uhci_hcd with -EEXIST, don't try to register things with the same name in the same directory.
[<c03e86f7>] kobject_shadow_add+0x117/0x1a0
[<c013fba4>] mod_sysfs_setup+0x24/0xb0
[<c0141458>] sys_init_module+0x1648/0x1940
[<c0102ae8>] syscall_call+0x7/0xb
[<c0710000>] __mutex_lock_slowpath+0x40/0x90
=======================
kobject_add failed for uhci_hcd with -EEXIST, don't try to register things with the same name in the same directory.
[<c03e86f7>] kobject_shadow_add+0x117/0x1a0
[<c013fba4>] mod_sysfs_setup+0x24/0xb0
[<c0141458>] sys_init_module+0x1648/0x1940
[<c0102ae8>] syscall_call+0x7/0xb
[<c0710000>] __mutex_lock_slowpath+0x40/0x90
=======================
kobject_add failed for uhci_hcd with -EEXIST, don't try to register things with the same name in the same directory.
[<c03e86f7>] kobject_shadow_add+0x117/0x1a0
[<c013fba4>] mod_sysfs_setup+0x24/0xb0
[<c0141458>] sys_init_module+0x1648/0x1940
[<c0102ae8>] syscall_call+0x7/0xb
[<c0710000>] __mutex_lock_slowpath+0x40/0x90
=======================
kobject_add failed for uhci_hcd with -EEXIST, don't try to register things with the same name in the same directory.
[<c03e86f7>] kobject_shadow_add+0x117/0x1a0
[<c013fba4>] mod_sysfs_setup+0x24/0xb0
[<c0141458>] sys_init_module+0x1648/0x1940
[<c0102ae8>] syscall_call+0x7/0xb
[<c0710000>] __mutex_lock_slowpath+0x40/0x90
=======================
i2c_core: exports duplicate symbol i2c_smbus_write_i2c_block_data (owned by kernel)
via-rhine.c:v1.10-LK1.4.3 2007-03-06 Written by Donald Becker
kobject_add failed for ehci_hcd with -EEXIST, don't try to register things with the same name in the same directory.
[<c03e86f7>] kobject_shadow_add+0x117/0x1a0
[<c013fba4>] mod_sysfs_setup+0x24/0xb0
[<c0141458>] sys_init_module+0x1648/0x1940
[<c0102ae8>] syscall_call+0x7/0xb
=======================

... (izbačen dio)

ACPI: PCI Interrupt 0000:00:0a.0[A] -> GSI 18 (level, low) -> IRQ 19
saa7133[0]: found at 0000:00:0a.0, rev: 209, irq: 19, latency: 32, mmio: 0xdfffb800
saa7133[0]: subsystem: 185b:c900, board: UNKNOWN/GENERIC [card=0,autodetected]
saa7133[0]: board init: gpio is 84bf00
saa7133[0]: i2c eeprom 00: 5b 18 00 c9 54 20 1c 00 43 43 a9 1c 55 d2 b2 92
saa7133[0]: i2c eeprom 10: 00 ff 86 0f ff 20 ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom 20: 01 40 01 02 02 01 03 01 08 ff 00 87 ff ff ff ff
saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom 40: ff d7 00 c4 86 1e 05 ff 02 c2 ff 01 c6 ff 05 ff
saa7133[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff cb
saa7133[0]: i2c eeprom 60: 35 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: registered device video0 [v4l2]
saa7133[0]: registered device vbi0

... (izbačen dio)
-- kraj dmesg

Kartica nije prepoznata, a u datoteci /usr/src/linux/Documentation/video4linux/CARDLIST.saa7134 nije izlistan moj model, ali subsystem 185b:c900 je isti kao i kod Videomate DVB-T300.

Problem je kada probam
modprobe -r saa7134
modprobe saa7134
WARNING: Error inserting i2c_core (/lib/modules/2.6.21.5-smp/kernel/drivers/i2c/i2c-core.ko): Invalid module format

Isto je i sa modprobe saa7134 card=70 (gdje je card=70 model DVB-T300)

Naišao sam na wiki LinuxTVa http://www.linuxtv.org/wiki/index.php/Saa713x_devices#Supported_saa713x_devices, i na svježoj verziji: http://linuxtv.org/hg/v4l-dvb/file/tip/linux/Documentation/video4linux/CARDLIST.saa7134 vidim moju karticu pod brojem 139. Trebam li možda novi driver, ili kernel, ili jedno i drugo?

Ako da, trebam li slijediti ove korake za moju distribuciju?
URL: http://www.linuxtv.org/wiki/index.php/How_to_build_from_Mercurial



Unaprijed zahvalan
Postano : 08.02.2009 14:04:48
Izradi PDF od ove poruke Ispis
Vrh
 Vrh   Prethodna tema   Sljedeca tema

 


 Ne možete pokrenuti novu temu.
 Možete citati teme.
 Ne možete odgovarati na poruke.
 Ne možete uredivati svoje poruke.
 Ne možete brisati svoje poruke.
 Ne možete dodavati nove ankete.
 Ne možete glasati u anketama.
 Ne možete dodavati fileove porukama.
 Ne možete slati poruke bez odobrenja.
Copyright © 1995-2009 HULK web team. Sva prava pridržana. RSS. Engine: XOOPS