imam tv karticu iz naslova. na mint-u 7 kojem je baza ubuntu 9.04 nakon učitanja drive i modula nikako mi nije htjelo u /dev folderu stvoriti dvb device

nakon toga probam s ubuntu 9.10 alpha 5 (znam, znam alpha je alpha ..ali) koji mi lijepo prepoznaje karticu

hrvooje@pila:/usr/share/dvb/dvb-t$ dmesg | grep DVB
[ 5.435391] saa7133[0]: subsystem: 0070:6707, board: Hauppauge WinTV-HVR1120 DVB-T/Hybrid [card=156,autodetected]
[ 5.616529] tveeprom 0-0050: TV standards PAL(B/G) PAL(I) SECAM(L/L') PAL(D/D1/K) ATSC/DVB Digital (eeprom 0xf4)
[ 31.028076] DVB: registering new adapter (saa7133[0])
[ 31.028078] DVB: registering adapter 0 frontend 0 (NXP TDA10048HN DVB-T)...
hrvooje@pila:/usr/share/dvb/dvb-t$ ^C
hrvooje@pila:/usr/share/dvb/dvb-t$


našao sam i firmware koji mi treba i kopirao ga u /lib/firmware/

rvooje@pila:/usr/share/dvb/dvb-t$ dmesg | grep firmware
[ 31.432022] tda10048_firmware_upload: waiting for firmware upload (dvb-fe-tda10048-1.0.fw)...
[ 31.432026] saa7134 0000:04:07.0: firmware: requesting dvb-fe-tda10048-1.0.fw
[ 31.458042] tda10048_firmware_upload: firmware read 24878 bytes.
[ 31.458044] tda10048_firmware_upload: firmware uploading
[ 35.564026] tda10048_firmware_upload: firmware uploaded
hrvooje@pila:/usr/share/dvb/dvb-t$


instalirao dvb-apps i nakon što skeniram pokaže mi ovo:


scanning /usr/share/dvb/dvb-t/hr-Zagreb
using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
initial transponder 522000000 0 3 9 6 1 0 0
initial transponder 522000000 0 3 9 6 1 0 0
initial transponder 754000000 0 3 9 6 1 0 0
initial transponder 570000000 0 3 9 6 1 0 0
initial transponder 594000000 0 3 9 6 1 0 0
initial transponder 778000000 0 3 9 6 1 0 0
initial transponder 530000000 0 3 9 6 1 0 0
initial transponder 714000000 0 3 9 6 1 0 0
>>> tune to: 522000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_3_4:FEC_AUTO:QAM_AUTO:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_32:HIERARCHY_NONE
WARNING: >>> tuning failed!!!
>>> tune to: 522000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_3_4:FEC_AUTO:QAM_AUTO:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_32:HIERARCHY_NONE (tuning failed)
WARNING: >>> tuning failed!!!
>>> tune to: 522000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_3_4:FEC_AUTO:QAM_AUTO:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_32:HIERARCHY_NONE
WARNING: >>> tuning failed!!!
>>> tune to: 522000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_3_4:FEC_AUTO:QAM_AUTO:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_32:HIERARCHY_NONE (tuning failed)
WARNING: >>> tuning failed!!!
>>> tune to: 754000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_3_4:FEC_AUTO:QAM_AUTO:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_32:HIERARCHY_NONE
WARNING: >>> tuning failed!!!
>>> tune to: 754000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_3_4:FEC_AUTO:QAM_AUTO:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_32:HIERARCHY_NONE (tuning failed)
WARNING: >>> tuning failed!!!
>>> tune to: 570000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_3_4:FEC_AUTO:QAM_AUTO:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_32:HIERARCHY_NONE
WARNING: >>> tuning failed!!!
>>> tune to: 570000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_3_4:FEC_AUTO:QAM_AUTO:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_32:HIERARCHY_NONE (tuning failed)
WARNING: >>> tuning failed!!!
>>> tune to: 594000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_3_4:FEC_AUTO:QAM_AUTO:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_32:HIERARCHY_NONE
WARNING: >>> tuning failed!!!
>>> tune to: 594000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_3_4:FEC_AUTO:QAM_AUTO:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_32:HIERARCHY_NONE (tuning failed)
WARNING: >>> tuning failed!!!
>>> tune to: 778000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_3_4:FEC_AUTO:QAM_AUTO:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_32:HIERARCHY_NONE
WARNING: >>> tuning failed!!!
>>> tune to: 778000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_3_4:FEC_AUTO:QAM_AUTO:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_32:HIERARCHY_NONE (tuning failed)
WARNING: >>> tuning failed!!!
>>> tune to: 530000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_3_4:FEC_AUTO:QAM_AUTO:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_32:HIERARCHY_NONE
WARNING: >>> tuning failed!!!
>>> tune to: 530000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_3_4:FEC_AUTO:QAM_AUTO:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_32:HIERARCHY_NONE (tuning failed)
WARNING: >>> tuning failed!!!
>>> tune to: 714000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_3_4:FEC_AUTO:QAM_AUTO:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_32:HIERARCHY_NONE
WARNING: >>> tuning failed!!!
>>> tune to: 714000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_3_4:FEC_AUTO:QAM_AUTO:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_32:HIERARCHY_NONE (tuning failed)
WARNING: >>> tuning failed!!!
ERROR: initial tuning failed
dumping lists (0 services)
Done.
hrvooje@pila:/usr/share/dvb/dvb-t$


radio sam po ovom

tutorialu

Može li netko pomoć tko ima više iskustva s tv-karticama?

Mislim da ti nitko neće znati pomoći ako nema tu karticu. Po linuxtv.org stranicama i mailing listi koliko sam pogledao nabrzinu, kartica bi trebala biti podržana. Jedina stvar koju korisnik mora napraviti je ubaciti firmware datoteku, pošto ju nije dozvoljeno distribuirati s linuxima.

Ako ne dobiješ drugi odgovor ili ne uspiješ riješiti problem, prijavi bug na linux-media mailing listi. Kratke upute su ovdje.

Eh da, ako postaš na ML, nemoj brkat modele, na linuxzasve forumu si napisao u postu HVR-1100.

znam da sam napisao na linuxzasve 1100, ali na kutiji i piše 1100, a na čipu na kartici piše 1110.

na wikipediji sam vidio da je ova 1110 trokutasta kao moja, što sa 1100 nije slučaj.