Poštovani linux korisnici,

Imam relativno novu Dual Analog+DVB-T karticu Compro Videomate Vista T750F i do sada sam uspješno instalirao samo program za gledanje TVTime verzije 1.0.2. Kada ga otvorim prisutna je samo crna slika.
_______
lspci -vnn:
00:0a.0 Multimedia controller [0480]: Philips Semiconductors SAA7133/SAA7135 Video Broadcast Decoder [1131:7133] (rev d1)
Subsystem: Compro Technology, Inc. VideoMate T750 [185b:c900]
Flags: bus master, medium devsel, latency 32, IRQ 20
Memory at dfffb800 (32-bit, non-prefetchable) [size=2K]
Capabilities: [40] Power Management version 2
_____
dmesg (prikazane su samo relativne stvari):

# Ovo su neke greške, možda nešto vezano za i2c_core

... (izbačen dio)

ACPI: PCI Interrupt 0000:00:0b.0[A] -> GSI 19 (level, low) -> IRQ 18
Linux video capture interface: v2.00
i2c_core: exports duplicate symbol i2c_smbus_write_i2c_block_data (owned by kernel)
saa7130/34: v4l2 driver version 0.2.14 loaded
kobject_add failed for uhci_hcd with -EEXIST, don't try to register things with the same name in the same directory.
[<c03e86f7>] kobject_shadow_add+0x117/0x1a0
[<c013fba4>] mod_sysfs_setup+0x24/0xb0
[<c0141458>] sys_init_module+0x1648/0x1940
[<c0102ae8>] syscall_call+0x7/0xb
[<c0710000>] __mutex_lock_slowpath+0x40/0x90
=======================
kobject_add failed for uhci_hcd with -EEXIST, don't try to register things with the same name in the same directory.
[<c03e86f7>] kobject_shadow_add+0x117/0x1a0
[<c013fba4>] mod_sysfs_setup+0x24/0xb0
[<c0141458>] sys_init_module+0x1648/0x1940
[<c0102ae8>] syscall_call+0x7/0xb
[<c0710000>] __mutex_lock_slowpath+0x40/0x90
=======================
kobject_add failed for uhci_hcd with -EEXIST, don't try to register things with the same name in the same directory.
[<c03e86f7>] kobject_shadow_add+0x117/0x1a0
[<c013fba4>] mod_sysfs_setup+0x24/0xb0
[<c0141458>] sys_init_module+0x1648/0x1940
[<c0102ae8>] syscall_call+0x7/0xb
[<c0710000>] __mutex_lock_slowpath+0x40/0x90
=======================
kobject_add failed for uhci_hcd with -EEXIST, don't try to register things with the same name in the same directory.
[<c03e86f7>] kobject_shadow_add+0x117/0x1a0
[<c013fba4>] mod_sysfs_setup+0x24/0xb0
[<c0141458>] sys_init_module+0x1648/0x1940
[<c0102ae8>] syscall_call+0x7/0xb
[<c0710000>] __mutex_lock_slowpath+0x40/0x90
=======================
i2c_core: exports duplicate symbol i2c_smbus_write_i2c_block_data (owned by kernel)
via-rhine.c:v1.10-LK1.4.3 2007-03-06 Written by Donald Becker
kobject_add failed for ehci_hcd with -EEXIST, don't try to register things with the same name in the same directory.
[<c03e86f7>] kobject_shadow_add+0x117/0x1a0
[<c013fba4>] mod_sysfs_setup+0x24/0xb0
[<c0141458>] sys_init_module+0x1648/0x1940
[<c0102ae8>] syscall_call+0x7/0xb
=======================

... (izbačen dio)

ACPI: PCI Interrupt 0000:00:0a.0[A] -> GSI 18 (level, low) -> IRQ 19
saa7133[0]: found at 0000:00:0a.0, rev: 209, irq: 19, latency: 32, mmio: 0xdfffb800
saa7133[0]: subsystem: 185b:c900, board: UNKNOWN/GENERIC [card=0,autodetected]
saa7133[0]: board init: gpio is 84bf00
saa7133[0]: i2c eeprom 00: 5b 18 00 c9 54 20 1c 00 43 43 a9 1c 55 d2 b2 92
saa7133[0]: i2c eeprom 10: 00 ff 86 0f ff 20 ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom 20: 01 40 01 02 02 01 03 01 08 ff 00 87 ff ff ff ff
saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom 40: ff d7 00 c4 86 1e 05 ff 02 c2 ff 01 c6 ff 05 ff
saa7133[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff cb
saa7133[0]: i2c eeprom 60: 35 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: registered device video0 [v4l2]
saa7133[0]: registered device vbi0

... (izbačen dio)
-- kraj dmesg

Kartica nije prepoznata, a u datoteci /usr/src/linux/Documentation/video4linux/CARDLIST.saa7134 nije izlistan moj model, ali subsystem 185b:c900 je isti kao i kod Videomate DVB-T300.

Problem je kada probam
modprobe -r saa7134
modprobe saa7134
WARNING: Error inserting i2c_core (/lib/modules/2.6.21.5-smp/kernel/drivers/i2c/i2c-core.ko): Invalid module format

Isto je i sa modprobe saa7134 card=70 (gdje je card=70 model DVB-T300)

Naišao sam na wiki LinuxTVa http://www.linuxtv.org/wiki/index.php/Saa713x_devices#Supported_saa713x_devices, i na svježoj verziji: http://linuxtv.org/hg/v4l-dvb/file/tip/linux/Documentation/video4linux/CARDLIST.saa7134 vidim moju karticu pod brojem 139. Trebam li možda novi driver, ili kernel, ili jedno i drugo?

Ako da, trebam li slijediti ove korake za moju distribuciju?
URL: http://www.linuxtv.org/wiki/index.php/How_to_build_from_Mercurial



Unaprijed zahvalan